New: get 5% back in store credit on every online order How it works

TFmini LiDAR Distance Sensor

$50
Currently unavailable — ask us about restocking
Price $50
Category Lidars, Sensors
Availability Currently unavailable
Delivery Shipped across Lebanon, or collect from the lab

A thumb-sized laser rangefinder from Benewake that measures one point straight ahead, from 0.3 to 12 metres, 100 times a second. It times an 850 nm infrared pulse (time of flight), so it reads to 5 mm and stays accurate to about 1% under 6 m - far beyond what an ultrasonic sensor manages, and unaffected by soft or angled surfaces that swallow sound. Distance streams out over a 115,200 baud serial line on a 5V supply, ready for an Arduino, ESP32 or Raspberry Pi, and it is a common pick for drone altitude hold and robot obstacle sensing.

Key features

  • Measures 0.3 to 12 m (5 m on a dark, 10%-reflective target)
  • 100 readings per second, 5 mm resolution
  • Accuracy 1% under 6 m, 2% from 6 to 12 m
  • Narrow 2.3-degree beam: about 4 cm wide per metre of distance
  • Serial (UART) output with signal strength - no setup needed
  • 5V supply, about 0.12 W; 3.3V serial logic
  • Works outdoors: 7 m in normal daylight, up to 70,000 lux
  • 42 x 15 x 16 mm, 6.1 g, two M2 mounting holes

Details

Specifications

Model Benewake TFmini
Type Single-point time-of-flight (ToF) lidar
Range 0.3 - 12 m (90% reflective target, indoors)
Range, dark target 5 m at 10% reflectivity
Range outdoors 7 m below 70 klux; 3 m in strong summer sun
Accuracy 1% below 6 m, 2% from 6 to 12 m
Resolution 5 mm
Update rate 100 Hz
Field of view 2.3 degrees
Light source 850 nm infrared
Supply voltage 5V DC (4.5 - 6V)
Power 120 mW average (800 mA LED peak)
Interface UART, 115200 baud, 8N1, 3.3V TTL
Output 9-byte frame: distance + signal strength
Wires Red +5V, black GND, green TX, white RX
Operating temperature -20 to 60 °C
Dimensions 42 x 15 x 16 mm
Mounting 2 holes, 2.35 mm, 36 mm apart
Weight 6.1 g