| Price | $0.50 |
|---|---|
| Category | Components |
| Availability | In stock |
| Delivery | Shipped across Lebanon, or collect from the lab |
The audio designer's default dual op-amp. Input noise of 5 nV per root Hz at 1 kHz, 12 MHz unity-gain bandwidth and enough output drive to work into 600 ohm loads - which is why it has been the standard part in mixing desks, phono and microphone preamps and hi-fi line stages for decades. It runs on split rails from plus/minus 5 V to plus/minus 15 V. Bipolar inputs, so it is not the chip for single-supply sensor work; use an LM358 there.
Key features
- Dual low-noise op-amp, 8-pin DIP
- 5 nV per root Hz input noise at 1 kHz
- 12 MHz unity-gain bandwidth
- 5 V/us slew rate, 100 dB typical CMRR
- Split supplies, +/-5 V to +/-15 V
- Drives 600 ohm loads - preamps, mixers, line stages
Details
Specifications
| Chip | NE5532P (Texas Instruments) |
|---|---|
| Type | Dual low-noise operational amplifier |
| Package | 8-pin PDIP, 9.81 mm x 6.35 mm |
| Supply voltage | +/-5 V to +/-15 V (+/-18 V absolute max) |
| Input noise voltage | 5 nV per root Hz typ at 1 kHz |
| Unity-gain bandwidth | 12 MHz typ |
| Slew rate | 5 V/us typ |
| Common-mode rejection | 100 dB typ |
| Open-loop gain | 100 V/mV typ |
| Operating temperature | 0 degC to 70 degC |
