Wireless Module Expansion Card XBee Zigbee Shield RF Module Expansion Board For Arduino UNO
| Price | $8 |
|---|---|
| Category | Shields |
| Availability | In stock |
| Delivery | Shipped across Lebanon, or collect from the lab |
An XBee carrier shield for the Uno, in the classic Arduino XBee Shield layout: a 2 mm socket takes an XBee or XBee Pro and an on-board 3.3V regulator feeds it. Two jumpers marked XBEE and USB decide where the radio's serial lines go - in the XBEE position it talks to the Arduino on D0 and D1, the Uno's only hardware serial pins, and in the USB position it connects straight to the PC so you can upload sketches and configure the module.
Key features
- 2 mm XBee socket for XBee or XBee Pro modules (radio not included)
- XBEE / USB jumpers route the radio to the Uno or to the PC
- Uses the Uno's hardware serial - D0 (RX) and D1 (TX)
- Move jumpers to USB to upload sketches or configure the radio
- On-board 3.3V regulator, ASSOCIATE LED and reset button
- XBee's own I/O, DIN, DOUT, RST and PWM pins broken out
Details
Specifications
| For | Arduino Uno (stacking shield) |
|---|---|
| Type | XBee / Zigbee wireless shield |
| Radio socket | 2 x 10-way, 2 mm pitch (XBee / XBee Pro) |
| Pins used | D0 (RX) and D1 (TX) when the jumpers are set to XBEE |
| Jumpers | XBEE / USB pair - radio to microcontroller, or radio to PC |
| Power | On-board 3.3V regulator for the radio |
| Extras | ASSOCIATE LED, reset button, XBee I/O broken out |
| Module | XBee sold separately |
