| Price | $15 |
|---|---|
| Category | Actuators & Drivers |
| Availability | In stock |
| Delivery | Shipped across Lebanon, or collect from the lab |
A stand-alone TB6560AHQ driver for one bipolar stepper up to 3A - the affordable step up from a StepStick when you move to NEMA 23. It runs on 10-35V, with 24V the sweet spot, and DIP switches set the microstepping (full, 1/2, 1/8, 1/16), the current as 20, 50, 75 or 100% of 3A, and the decay mode. Step, direction and enable go through 6N137 high-speed optocouplers, so your Arduino or breakout board stays electrically isolated from the motor supply.
Key features
- One bipolar stepper, 3 A max, 3.5 A peak
- Supply 10-35V DC, 24V recommended
- DIP-set microstepping: full, 1/2, 1/8, 1/16
- DIP-set current: 20 / 50 / 75 / 100% of 3 A
- 6N137 opto-isolated step, direction and enable
- Heatsink and screw terminals, 75 x 50 x 35 mm
Details
Specifications
| Chipset | Toshiba TB6560AHQ |
|---|---|
| Motors | 1 bipolar stepper, NEMA 17 or NEMA 23 |
| Supply voltage | 10-35V DC (24V recommended) |
| Continuous current | 3 A max |
| Peak current | 3.5 A |
| Microstepping | full, 1/2, 1/8, 1/16 |
| Current setting | DIP switch, 20 / 50 / 75 / 100% |
| Decay setting | DIP switch, 0 / 25 / 50 / 100% |
| Interface | CLK (step), CW (direction), EN - opto-isolated, 5V level |
| Protection | low-voltage shutdown, over-heat, over-current |
| Dimensions | 75 x 50 x 35 mm |
