| Price | $2 |
|---|---|
| Category | Sensors |
| Availability | In stock |
| Delivery | Shipped across Lebanon, or collect from the lab |
A small I2C breakout for the AHT10, a calibrated temperature and humidity sensor that is a real step up from a DHT11: plus or minus 0.3 degrees C and plus or minus 2% RH, over -40 to +85 degrees C and the full humidity range. It sits at I2C address 0x38, with a solder pad to move it to 0x39 for a second sensor on the same bus, and runs on anything from 1.8 to 6V.
Key features
- Temperature to plus or minus 0.3 degrees C
- Humidity to plus or minus 2% RH, 0-100% range
- I2C at 0x38, solder pad moves it to 0x39
- Runs on 1.8-6V, so 3.3V or 5V both fine
- Factory calibrated - no maths, just read the registers
- Much more accurate than a DHT11 for about the same money
Details
Specifications
| Model | AHT10 |
|---|---|
| Form | 4-pin breakout module (VCC, GND, SDA, SCL) |
| Measures | Temperature + relative humidity |
| Temperature range | -40 to +85 degrees C |
| Temperature accuracy | plus or minus 0.3 degrees C |
| Humidity range | 0 to 100% RH |
| Humidity accuracy | plus or minus 2% RH |
| Interface | I2C (digital bus) |
| I2C address | 0x38 default, 0x39 via the board's solder pad |
| Operating voltage | 1.8V to 6.0V DC |
