| Price | $3 |
|---|---|
| Category | Actuators & Drivers |
| Availability | In stock |
| Delivery | Shipped across Lebanon, or collect from the lab |
A MOSFET dual H-bridge that does the L298N's job with far less wasted heat: 1.2A per channel continuously, 3.2A peak, on a 20 mm square breakout. Motor supply goes up to 15V and the logic side takes 2.7-5.5V, so it suits 3.3V boards like an ESP32 as well as an Arduino. Each channel has two direction pins and a PWM pin accepting up to 100 kHz, plus a shared standby pin that puts the chip to sleep - which is why it is the usual choice for battery-powered line followers and micro robots.
Key features
- Two channels, 1.2 A each, 3.2 A peak
- Motor supply up to 15V, logic 2.7-5.5V
- MOSFET outputs waste much less than an L298N
- PWM to 100 kHz, four modes incl. short brake
- Standby pin for low-power sleep
- ~20 x 20 mm, breadboard-friendly headers
Details
Specifications
| Chipset | Toshiba TB6612FNG |
|---|---|
| Channels | 2 DC motors, or 1 bipolar stepper |
| Motor supply (VM) | up to 15V DC |
| Logic voltage (VCC) | 2.7-5.5V DC |
| Continuous current | 1.2 A per channel |
| Peak current | 3.2 A per channel |
| Interface | AIN1/AIN2 + PWMA, BIN1/BIN2 + PWMB, STBY |
| PWM frequency | up to 100 kHz |
| Modes | clockwise, counter-clockwise, short brake, stop |
| Protection | thermal shutdown, low-voltage detection |
| Dimensions | ~20 x 20 mm (0.8 x 0.8 in) |
| Pairs with | TT gearmotors and other small 6-12V brushed motors |
